Organic silicon thermal conductive gel
ZJ-DR6200PC additive silicone thermal conductive adhesive is a two component product that is soft and compressible after curing. It is mainly used for heat dissipation of heating components such as power batteries and electronic equipment.
Product features
1. Excellent electrical insulation performance.
2. Good thermal conductivity, with a thermal conductivity coefficient of 2W · m-1 · K-1.
3. Can be cured at room temperature or by heating.
4. After application, it does not flow in the horizontal or vertical direction.
5. It is easy to rework after solidification.
6. Flame retardant grade: V-0.
7. The shrinkage of the product is small after curing.
| Inspection items | Technical indicators | Test method |
| Appearance of component A |
White |
Visualization |
| Appearance of component B | Blue | Visualization |
|
Component A viscosity(Pa·s,10 rpm) |
334 |
GB/T 10247 |
|
Group A thixotropy index(2rpm/10rpm) |
2.4 |
/ |
|
Component B viscosity (Pa·s,10 rpm) |
352 |
GB/T 10247 |
|
Thixotropy index of component B(2rpm/10rpm) |
2.3 |
/ |
| Mixing ratio (weight ratio) |
1:1 |
/ |
|
Specific gravity after mixing （g/cm3） |
2.1 |
GB/T 13354 |
|
Operable time （min/25℃） |
60 |
GB/T7123.1-2015 |
|
Curing time（h/25℃） |
4 |
/ |
|
Curing time （h/80℃） |
0.5 |
/ |
|
Hardness after curing(Shore00) |
55 |
GB/T 531.1 |
|
Thermal conductivity coefficient [ W·m-1·K-1）] |
2.07 |
IS0 22007-2 |
|
Breakdown voltage（kV/mm） |
11 |
GB/T 1695 |
|
Volume resistivity（Ω·cm） |
1.0×1013 |
GB/T1692 |
| Flame retardant performance |
V-0 |
UL94 |
|
Operating temperature（℃) |
-50-200 |
/ |
- 1. Clean the surface of the substrate from dust, oil, etc. before use.
- 2. Components A and B should be thoroughly and evenly mixed to avoid affecting curing.
- 3. The contact of the adhesive with the following chemical substances will cause the adhesive to not solidify: N, P, S organic compounds; Sn, Pb, Hg, As plasma compounds; Containing alkynes and multi vinyl compounds.
- Hazard indications, safety recommendations, transportation rules
- 1. Wear protective gloves for long-term or repeated contact.
- 2. Keep away from ignition sources, sparks, and open flames, keep the container sealed, and use explosion-proof electrical, ventilation, and lighting equipment.
- 3. This product belongs to non hazardous materials and can be transported as non hazardous materials.
This product can be provided in 400ml, 600ml double tube packaging or other packaging according to customer needs
This product should be stored in a well ventilated place with a storage temperature below 30 ℃ and a storage period of 6 months.